FAQ:

Q1: How to pair Bridges?

A1: If you need to expand the wifi signal, you must first pair the two Bridges and then secure them to the designated place.Set one of the Bridges as the Master Bridge and move the switch on the bridge to the "M" end.The other Bridge is set as the Slave Bridge, and the switch on the bridge is moved to the "S" end.
Then you need to press the "RST" button of both Bridges to set same number, and the Bridges will automatically pair.

Q2: i can not log in web ui page for the bridge?

A2: If you need to manage the bridge, you can use a computer wired connect or smartphone wifi connect to the bridge.Then set a static IP address for the network to access the WEB UI page.
You can set static ip address type 169.254.254.20 and Subnet mask type 255.255.255.0.
And then you can log in web ui page 169.254.254.254 in browser.
After setting is complete, the IP address must be restored to its initial setting. Otherwise your device cannot access the Internet.

Q3: Outdoor wi-fi bridge is less than described distance?

A3: The transmission distance is affected by many factors, such as local network conditions, buildings, trees, etc.，maybe it cannot reach described distance.

Q4: The bridge Wi-Fi signal is weak or the transmission distance is short?

A4: Adjusting the wifi protocol and bandwidth of the bridge will give you different network speeds and different transmission distances. You need to continuously debug to the best state for different environments and requirements.

Q5: Does the bridge support 360-degree signal transmission?

A5:The bridge uses panel antennas, so it does not support 360-degree transmission. It is recommended that when installing, the two Bridges are face to face, which can improve the stability of Wi-fi signal transmission.

Q6: Can't find a Wi-Fi signal?

A6: Since each country supports different Wifi channels, I suggest you log into the WEB UI page to change the region of Wifi signal or use another channel.

Product Description:

High Speed Wireless Bridge:

Utilizing the latest 802.11ac WiFi standard and 5.8G Technology, this wireless bridge has better transmission distance, stronger anti-interference ability and better stability, data rate max up to 450Mbps between the bridge.

High Power Outdoor CPE Router:

The point to point wireless bridge built-in 8dBi directional plate antenna can significantly improve the transmission and reception performance of wireless signals, which supports 1-2KM (Barrier-free)long-distance wireless transmission.

Portable，Easy to Set up:

Outdoor wifi bridge router comes with a digital tube display. Pairing can be done by simple dialing, avoiding the complex setup program. Supports 24V PoE power supply for flexible deployment, make the long range wireless transmission and monitoring much simple and save much human work and cost.

Point to Point Connection for Wireless Extension:

This wireless bridge set support point-to-point, point-to-multipoint modes to extend network or camera monitoring range. Such as lane monitoring, elevator monitoring,extedng the network in the house to your backyard, garden, barn, etc.

IP65 Waterproof Design:

The shell of the wireless bridge is with IP65 Level weatherproof, dustproof, lightning protection which ensures continued operation in harsh outdoor environments. Suiable for reliable use outdoor.

Specification:

Material: ABS
Dimension:21cm*9.5cm*4.0cm/8.27"*3.7"*1.57"
Color: White
FLASH Memory:8MB
DDR Memory:32MB
5.8G WiFi:Up to 450Mbps
RF Frequency Range:5180 GHz ~ 5825 GHz
Power Supply:Power Adapter DC 12V 1APOE power :24V 0.5A
5GHz Channel: 149,153,157,161,165
Operating Temperature:-20~+70°C
Storage Temperature:-40~+85°C

Package Included:

2* Wireless Bridge
2*POE Power Adapter
4*Plastic Hoop
1*Quick Start Guide